Main Services Template

Seconday heading in case of need
RBC's Advanced Manufacturing Services

RBC is an ISO 13485 | ISO 9001 certified, FDA registered Medical Device manufacuturer. With decades of combined experience in medical device engineering and contract manufacturing, our team knows what it takes to produce high quality equipment and deliver it on time. We specialize in the manufacturing of Class I, II, and III medical devices for US and International markets.

Medical device innovators who choose RBC as their medical device engineering and contract manufacturing partner say they selected us for these reasons.

Quality: We have stringent processes for documentation, GMP diligence, training, and regulatory processes as required in this highly regulated industry.

Complexity: RBC specializes in the manufacture and assembly of complex electromechanical medical devices. We have been in the field for 22 years and likely have immediately relevant experience to lend to your project.

Low run volume: We are set up to also handle smaller runs and therefore do not require the large volume commitments other manufacturers do.

Development support: Our engineering teams supports the changes required through the product’s life cycle.

Location:RBC Manufacturing is located in the United States, at our centrally located facility in Lenexa, Kansas.

Get In Touch with RBC
0
Years of Experience
0 /10
Largest Medical Device Companies Trust RBC
0
Years of Experience
0 /10
Largest Medical Device Companies Trust RBC

20

Years of Experience

7/10

Largest Medical Device Companies Trust RBC

20

Years of Experience

7/10

Largest Medical Device Companies Trust RBC

A Comprehensive Portfolio of Success

Whether therapeutic or diagnostic, our product portfolio are available commercially in the United States and internationally.

Spinal Tumor RF Ablation System

Invasive / Non Invasive Ventilator

Renal RF
Ablation System

Vascular Compression System

Intra-Aortic
Balloon Pump

Information
Management

Endoilluminator

DIagnostic Equipment

RF Puncture Generator

featuredimg
Other Areas
of Specialization

Lorem ipsum dolor sit amet, consectetur adipiscing elit.

  • Device, Sub-Assembly or Accessory Production
  • Device Testing Services
  • Device Servicing and Repair
  • Manufacturing Engineering Support
  • Manufacturing Process Development and Fixture Design
  • Energy-based Product Manufacturing Expertise
  • Material Sourcing and Procurement Services
  • Logistical Warehousing and Fulfillment Services
  • Full Product Lifecycle Support
  • Transfer of Existing Product Lines
Other Areas
of Specialization

Lorem ipsum dolor sit amet, consectetur adipiscing elit.

  • Device, Sub-Assembly or Accessory Production
  • Device Testing Services
  • Device Servicing and Repair
  • Manufacturing Engineering Support
  • Manufacturing Process Development and Fixture Design
  • Energy-based Product Manufacturing Expertise
  • Material Sourcing and Procurement Services
  • Logistical Warehousing and Fulfillment Services
  • Full Product Lifecycle Support
  • Transfer of Existing Product Lines
featuredimg
Among the designs we actively support:
featuredimg
Analog Design

Our electronics design specialists in ‘signal acquisition’ and ‘instrumentation’ can design all types of filters and analog signal processing, instrumentation and isolation, motor and solenoid control, and feedback control systems.

Some examples of analog instrumentation solutions from our electrical engineering firm include:

  • Precision physiological light measurement systems requiring 140dB of dynamic range
  • Direct-to-digital diagnostic ECG amplifiers allowing significant product size reduction
  • Microvolt signal measurement through unshielded cabling in industrial conditions
  • High-pot instrumentation for production insulation testing to greater than 1Mega ohms
  • Feedback control system for stabilizing RMS cathode current in x-ray tube during exposure
  • Low-cost capacitive proximity and motion sensors for medical applications
  • Low-cost medical pressure measurement system replacing expensive multi-transducer system
  • Micropower, mixed-signal, data collection system capable of operating for months on a lithium coin-cell battery
Digital Design

RBC designs digital systems ranging from
single-chip, low-cost, 8-bit solutions to complex, multi-processor, multi-peripheral products. Such broad experience, combined with analog instrumentation, DSP, RF and software expertise, allows us to consolidate traditionally non-digital functions within our digital designs.

Our medical device development approach lets us provide design flexibility while minimizing component and assembly costs, product size, and power consumption.

featuredimg
featuredimg
RF Design

Over the past couple of decades, our electrical engineering firm has designed many RF medical devices from low-power communication devices to mid- and high-powered RF Generators for use in cardiac, orthopedic, and cosmetic procedures.

We have a long list of client success stories built upon our depth of experience in tackling the challenges with defining, specifying, designing, implementing and testing RF medical devices to all applicable efficacy and regulatory standards.We use the AdvantageRF™ Development Platform from Energize Medical to reduce your development time by more than half!

Optical Design

RBC Medical Innovations also has a deep history with medical product design projects that use illumination, imaging, sensing, therapy, diagnosis, and analysis. Our technology portfolio includes:

  • Photon Migration Simulation
  • Near Infrared Spectroscopy
  • Physiological Signal Analysis
  • Advanced Digital Filtering Techniques
  • High-Resolution Analog and Digital Signal Processing
  • Proof-of-Concept Prototyping
  • Clinical Validation Support
featuredimg
featuredimg
Electromechanical Design, Development, and Manufacturing

We conclude this page they way we began it: If you’re in the market for an electrical engineering firm, we urge you to contact RBC.

Electromechanical Design, Development, and Manufacturing (in low volumes, by hand, all in the United States) is what we do each day. We’re confident we can help you and, if we can’t for whatever reason, we surely can point you to the right resource.

510(K), PMA, AND CE MARK SUBMISSIONS
Depending on your needs, RBC Medical Innovations can produce all or part of the design documentation required for a FDA 510(k) submission, pre-market approval, or a CE Mark technical file.